XAPR FULL CONE AIR ATOMIZING NOZZLES

Internal Mix, Pressure-Fed Pneumatic Spray Nozzles
ImageDetail of the Air Atomizing Spray Pattern Icon
Image
1/4” XA02 PR050 E - XA02 Body, E Hardware
Related PDFs

DESIGN FEATURES

Internal mix

Very fine atomization

Full cone spray pattern

Large forward projection -up to 28 feet (8.5 m)


HOW SPRAY PATTERN IS ACHIEVED

In a pressure-fed system, the liquid is supplied under pressure to either internal or external mix BETE XA Series nozzles. Air and liquid regulators control the fluid delivery pressure, while the air filter and liquid strainer ensure that the supplied fluids are high quality. Operational control is maintained by manual or solenoid valves used in conjunction with the various hardware assemblies.

Liquid and air streams come together inside the nozzle and are mixed, and they exit through the same orifice creating a narrow-angle full cone spray pattern.

The streams are not independent; airflow changes will affect the liquid flow.

Available Spray Angle
17°
Available Connection Types
  • Pipe: 1/8, 1/4, 1/2
  • Connection Methods: Thread (NPT, BSP, Female)
Materials
Nickel-plated Brass, 303, 316, Nickel-plated Brass / 304, 303 / 304
Flow Rates, Spray Angles, Connections
Full Cone
Select a nozzle number below for performance graph, drawings, and to request a quote.
Flow rate (gpm/lpm) is calculated at differential pressure (psi/bar).
Nozzle Number
Connection Sizes
Spray Angles
Pipe: 1/8, 1/4
17°
Pipe: 1/8, 1/4
17°
Pipe: 1/8, 1/4
17°
Pipe: 1/8, 1/4
17°
Pipe: 1/8, 1/4
17°
Pipe: 1/8, 1/4
17°
Hollow Cone
Select a nozzle number below for performance graph, drawings, and to request a quote.
Flow rate (gpm/lpm) is calculated at differential pressure (psi/bar).
Nozzle Number
Connection Sizes
Spray Angles
Pipe: 1/2
17°
Pipe: 1/2
17°

SUBSCRIBE TO OUR NEWSLETTER