BETE CERTIFICATIONS & APPROVALS
APPROVAL AGENCY OR DESIGN STANDARD
ASME B31.1 Power Piping Code
ASME B31.3 Process Piping Code
ASME Boiler and Pressure Vessel Code, Section IX Welding Procedures
ATEX approval for Zone 0
BETE Conflict-Free Materials Due Diligence Policy
Canadian Registration Number (CRN)
Factory Mutual (FM Global) FM Approvals Class 2025
ASME Boiler and Pressure Vessel Code, Section IX Welding Procedures
Food and Drug Administration FDA 21CFR
NACE-MR 0175
NACE-MR 0103
NACE-SP0472
National Board Inspection Code Repair Organization
NAVSEA MIL-S-24660 (SH)
NFPA 15 Standard for Water Spray Fixed Systems for Fire Protection
NSF International Standard NSF-61
Pressure Equipment Directive (PED) PED 2014/68/EU
Underwriter's Laboratories (UL) UL 2351
ISO 9001: 2015 Quality System
US Coast Guard 46CFR 34.25
APPROVAL APPLICATION
Power piping (steam plant) applications
Various industrial process piping applications
Boiler, pressure vessel, and pressure piping systems used in process industries
Tank washing in potentially explosive environments
Suppliers to BETE must adopt a policy regarding conflict minerals consistent with BETE’s policy, implement management systems to support compliance with their policy, and require their suppliers to take the same steps.
Boiler, pressure vessel, and pressure piping systems in Canada
Fixed fire protection systems for various industries
Boiler, pressure vessel, and pressure piping systems used in process industries
Food processing industry
Petrochemical and Refining Industries when special corrosion resistant material is required.
Repair of pressure vessels and piping components
Fire protection onboard ships when specified by Naval Sea Systems Command, Department of the Navy, and Agencies of the Department of Defense
Fixed fire protection systems for various industries
Water and beverage industries
Boiler, pressure vessel, and pressure piping systems used in process industries in the European Community
Fixed fire protection systems for various industries
All industries
Fixed fire protection spray nozzles in tanker vessel pump rooms
PRODUCT
Boiler External Piping and Non Boiler External Piping assemblies are designed, manufactured, and inspected in compliance with ASME B31.1 when specified by customer requirements.
Welded assemblies are designed, manufactured, and inspected in compliance with ASME B31.3 when specified by customer requirements.
Assemblies are designed, manufactured, and inspected in compliance with ASME Boiler and Pressure Vessel Codes when specified by customer requirements.
All HydroWhirl Orbitors are certified to Zone 0.
HydroWhirl Orbitor 100s are available with ATEX approval.
BETE is committed to conducting business fairly and ethically, with respect for human rights, and in compliance with all applicable laws and regulations. We are committed to complying with the SEC’s rule on conflict minerals and the responsible sourcing of minerals through our global supply chain.
Approvals are obtained for products when specified by customer requirements
ALL N spray nozzles in various metals and alloys
TF8NN, TF8FCN, TF24-150, TF10-170 in Brass AFF Flat Fan nozzles
Assemblies are designed, manufactured, and inspected in compliance with ASME Boiler and Pressure Vessel Codes when specified by customer requirements.
BETE products can be manufactured with the following materials that meet FDA 21CFR requirements:
- Polypropylene
- PTFE (Teflon)
- PVDF (Kynar)
- Viton o-rings
Approvals are obtained for products when specified by customer requirements
Assemblies are repaired and inspected in compliance with the National Board Inspection Code when specified by customer requirements.
1/2" TF29-180-16
1/2" TF29-180-18
1/2" TF29-180-21
1/2" TF29-180-24
1/2" TF29-180-28
1/2" TF29-180-32
Brass only
Refer to specific fire protection approved BETE nozzles for performance information. Contact BETE for assistance selecting fire protection nozzles that meet NFPA guidelines.
The following NSF-61 compliant raw materials may be used to produce many BETE nozzles:
Polypropylene
Kynar
PVC
CPVC
Approvals are obtained for products when specified by customer requirements
The BETE ISO 9001 Quality System is used to ensure the quality of all BETE products.
APPROVAL CERTIFICATE
Certificate is issued for customer- specific products
Contact BETE for details
Approvals are obtained for products when specified by customer requirements
FM Approval: N and TF24-150
FM Approval: TF8NN and TF8FCN
FM Approval: TF10-170
FM Approval: AFF series
Certificate is issued for customer-specific products
Certificate is issued for customer-specific products
Government QAR witness inspection required. BETE Certificate of Compliance available upon request.
NFPA 15 is a system design standard, not a product approval standard.
A statement of raw material compliance to NSF61 is available upon request.
Certificate is issued for customer-specific products
