MAXIPASS® L (MPL) LOW FLOW FULL CONE NOZZLES

Energy-Efficient Axial Spray Nozzles for Cooling & Quenching
Detail Full Cone Spray Pattern Icon

DESIGN FEATURES

Ultimate clog-resistant design with largest free passage available in a full cone nozzle

Two unique S-shaped internal vanes, as opposed to x-vane style nozzles, allow maximum free passage of particles

Vanes are made from 316SS for optimum wear and corrosion resistance

High energy efficiency

Easily handles dirty, contaminated liquids

High-reliability spray performance under the most difficult conditions


HOW SPRAY PATTERN IS ACHIEVED

Atomization is achieved by the water being spun inside the nozzle and then exiting an orifice

Produces medium to coarse droplet size

More uniform pattern than spiral nozzles

Available Spray Angles
51 - 134°
Flow Rate Range
0.0859 to 3.02 gpm
Available Connection Types
  • Pipe: 1/8, 1/4
  • Connection Methods: Thread (NPT, BSP, Male)
Materials
Brass, 303, 316
Flow Rates, Spray Angles, Connections
Full Cone
Select a nozzle number below for performance graph, drawings, and to request a quote.
Flow rate (gpm/lpm) is calculated at differential pressure (psi/bar).
Nozzle Number
Connection Sizes
Spray Angles
Flow Rate (gpm) @ Differential Pressure (psi) (Density: 1 SG)
10 psi
20 psi
40 psi
50 psi
60 psi
80 psi
Pipe: 1/8
51°, 77°, 129°
0.116
0.156
0.210
0.231
0.250
0.283
Pipe: 1/8
53°, 86°, 134°
0.164
0.221
0.298
0.328
0.355
0.401
Pipe: 1/8
51°, 90°, 128°
0.231
0.312
0.420
0.462
0.500
0.566
Pipe: 1/8
61°, 92°, 127°
0.315
0.424
0.572
0.629
0.680
0.770
Pipe: 1/4
62°, 90°, 125°
0.425
0.573
0.772
0.850
0.919
1.04
Pipe: 1/4
60°, 92°, 124°
0.616
0.830
1.12
1.23
1.33
1.51
Pipe: 1/4
70°, 97°, 123°
0.832
1.12
1.51
1.66
1.80
2.03